Description
Glass Spray Dryer for Laboratory
| Type : LAB-1 |
| Changes liquid to be powder |
| – Suitable for single phase or three phase power supply. |
| – Spray Dried powder can be collected under cyclone as Single Point Discharge or optionally under chamber and cyclone as Two Point Discharge system. This gives flexibility to check particle size under chamber and cyclone. |
| – Drying Chamber and Cyclone are made from Glass for visual observation of the process. |
| – GMP / Pharmaceutical standards are observed in manufactured like avoiding crevasses , smooth finish ,guards provided for electric motors, use of food Grade Silicon Gaskets etc. |
| Specification : |
| – Water evaporation capacity : 1.0 – 2.0 kg/ hr |
| – Feed rate with 30% solid content w/w : 1.5 kg/ hr |
| – Powder rate : 0.5 kg/hr |
| – Inlet Temperature : Ambient to 260 deg C max |
| – Outlet Temperature : 60 – 100 deg C |
| – Flow between spray and hot gas : Two Fluid Compressed Air Nozzle System |
| – Method of powder collection : |
| “Blown Down” powder collected under the cyclone – Single Point Discharge and alternatively Two Point Discharge i.e. Under the cyclone and chamber |
| – Material of construction : |
| SS AISI 316L / 304 / Borosilicate Glass Original 2B finish on the plates and weld lines ground smooth to 180 grit sanitary design. |
| – Material of Drying Chamber : |
| Glass Cylinder; Borosilicate glass; annealed- stress Relieved- spark tested two piece construction for ease of cleaning. Powder removal in Assembly |
| + Top and bottom cones in SS 316L |
| – Atmospheric pressure : 760 mm Hg |
| – Ambient temperature : 30-40 deg .C Relative |
| – Location of installation : Indoor |
| Utility List : |
| 1. Electric Power Source ; Motor : 230V single phase or 440 V, 3 phase |
| Instruments : 230 V, single phase,50 Hz |
| 2. Electric List (Installed), Feed Pump : 0.50 HP, Exhaust Fan : 1.00 HP |
| 3. Other Utilities |
| – Power Requirement for Electrical Air Heater : 5KW |
| – Space Requirement (L x W x H) mm : 1200 x 1300x 2000 |
| – Weight of the unit : 150 Kgs |
| PLC operating system for spray dryer with HMI mounted on plant for operation. |
Jam Buka :
Senin – Jumat : Pukul 08.00 – 17.00 WIB
Sabtu : Pukul 08.00 – 15.00 WIB
*Pelayanan melewati jam kerja dilayani Via SMS / WA
PT. Multi Prima Inovasi menyediakan alat dan mesin berbagai macam yang anda butuhkan.
Kami siap membantu anda dalam mengembangkan usaha anda. Kenapa Harus Kami ? Kami adalah perusahaan penyedia / pembuat alat – alat / mesin – mesin yang terpercaya.
Seperti mesin-mesin industri, pertanian, perikanan, peternakan, perkebunan, konstruksi, UMKM, dan lain – lain. Mulai dari mesin sederhana hingga mesin – mesin industri besar, seperti Glass Spray Dryer for Laboratory
Layanan kami untuk anda adalah memberikan training dalam mengoperasikan mesin – mesin dari kami.
Selain itu kami siap memberikan konsultasi kepada anda pada saat anda bingung mau usaha apa? Sedangkan anda punya modal untuk diinvestasikan.
PT. Multi Prima Inovasi hanya akan memberikan mesin-mesin yang berkualitas untuk anda. Karena mesin – mesin kami dibuat oleh tenaga ahli kami sendiri, dan sudah melewati Quality Control.
Serta bisa anda coba sebelum anda bawa pulang. Sehingga anda akan merasa puas dengan pelayanan kami, karena kepuasan pelanggan adalah prioritas kami.
Reviews
There are no reviews yet.